NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 3-60 Removing the cap front panel
Step 2 Secure the cap with M5 screws, two screws for the front and rear panels
respectively, and three for the left and right panels respectively.
Figure 3-61 Securing a cap
Step 3 Secure the cap front panel to the frame, and adjust the angle of the front panel
blade.
● During the installation, grasp the panel frame instead of the blade to move the
panel to avoid blade deformation.
● The cap should be well sealed to the smart cooling product to ensure good
sealing performance in-between.
Issue 07 (2021-12-30)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
3 Installation
85