Huawei NetCol8000-C070 User Manual page 131

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
Figure 4-19 Login screen
Table 4-9 Parameter description
Parameter
Site
Device Type
Link
IP, Port, and
devAddr
Step 6 Tap Login after the parameters are set.
Step 7 After login, tap Power-on password activation on the screen. The screen shown
in Figure 4-20
Issue 07 (2021-12-30)
NO TE
● The preset user name is admin, and the preset password is Changeme.
● If you change the login password on the display module of the smart cooling product,
the password for logging in to the Service Export app will be changed accordingly.
Setting Method
Select the site as required.
Select the device type that needs to be connected. Select
NetCol8000-C in this situation.
Enable the connection between the device and the WiFi
network.
Enter the values as planned. For details, see values on the
Modbus settings screen of the display module.
is displayed, indicating whether to start the smart cooling product.
Copyright © Huawei Technologies Co., Ltd.
4 Power-On Commissioning
121