Webui Operations - Huawei NetCol8000-C070 User Manual

NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
●
Procedure
Step 1 Check whether strong electric interference exists around the smart cooling product
backplane.
●
●
Step 2 Disconnect the main power supply from the smart cooling product.
Step 3 Contact technical support to replace the smart cooling product backplane.
----End

7.5 WebUI Operations

Issue 07 (2021-12-30)
Figure 7-19 Message 1
If the information shown in
display module, the smart cooling product cannot run properly. Go to
and subsequent steps.
Figure 7-20 Message 2
NO TE
In Figure 2, the ACC V100R001C20SPC300 version is used as an example to describe
the prompt messages on the screen. The version in use may vary.
If yes, contact technical support.
If no, continue with Step
Copyright © Huawei Technologies Co., Ltd.
Figure 7-20 is displayed on the screen of the
2.
7 FAQ
Step 2
204