Handle; Removing The Handle - Dell Latitude 7230 Service Manual

Steps
1. Slip the stylus through the hole to create a knot that holds the tether to the chassis.
2. Insert the stylus into the slot on the tablet.
NOTE: When not in use, avoid hanging the stylus that is detached from its groove.
Next steps
1. Follow the procedure in

Handle

Removing the handle

Prerequisites
1. Follow the procedure in
About this task
The following images indicate the location of the handle and provide a visual representation of the removal procedure.
after working inside your
before working inside your
tablet.
tablet.
Removing and installing components 21