Steps
1. Align the screw holes on the handle with the screw holes on the tablet.
2. Replace the two screws (M3.5x15) to secure the handle to the chassis .
Next steps
1. Follow the procedure in
Back-cover assembly
Removing the base-cover assembly
Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the
handle
(for the models shipped with a handle).
4. Remove the batteries.
About this task
The figure indicates the location of the base-cover assembly and provides a visual representation of the removal procedure.
after working inside your
before working inside your
tablet.
tablet.
Removing and installing components
23