Dell Latitude 7230 Service Manual page 89

Table 13. System setup options—Passwords menu (continued)
Passwords
Digit
Special Character
Minimum Characters
Password Bypass
Password Changes
Enable Non-Admin Password Changes
Admin Setup Lockout
Enable Admin Setup Lockout
Master Password Lockout
Enable Master Password Lockout
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
Table 14. System setup options—Update, Recovery menu
Update, Recovery
UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
Reinforces password must have at least one digit number.
By default, the option is disabled.
Reinforces password must have at least one special character.
By default, the option is disabled.
Set the minimum characters allowed for password.
When enabled, this always prompts for system and internal hard drive
passwords when powered on from the off state.
By default, the Disabled option is selected.
Enable or disable to change system and hard drive password without the need
for admin password.
By default, the option is enabled.
Enables administrators control over how their users can or cannot access BIOS
setup.
By default, the option is disabled.
When enabled, this disables the master password support.
By default, the option is disabled.
Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.
By default, the option is disabled.
Enable or disable BIOS updates through UEFI capsule update packages.
NOTE: Disabling this option will block BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS).
By default, the option is enabled.
Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.
By default, the option is enabled.
NOTE: BIOS Recovery from Hard Drive is not available for self-encrypting
drives (SED).
This field controls the flashing of the system firmware to previous revisions.
By default, the option is enabled.
Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain system errors.
By default, the option is enabled.
BIOS setup 89