I/O Daughter-Board; Removing The I/O Daughter-Board - Dell Latitude 7230 Service Manual

4. Install the stylus.
5. Follow the procedure in

I/O daughter-board

Removing the I/O daughter-board

Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the handle (for the models shipped with a handle).
4. Remove the batteries.
5. Remove the back-cover
About this task
The figure indicates the location of the I/O daughter-board and provides a visual representation of the removal procedure.
NOTE: The headset port, USB 3.2 Gen 1 port with PowerShare, and microSD-card slot are part of I/O daughter-board.
Steps
1. Peel the conductive tape from the I/O daughter-board FPC.
38 Removing and installing components
after working inside your
before working inside your
assembly.
tablet.
tablet.