Installing The Front Camera And Microphone Assembly - Dell Latitude 7230 Service Manual

Steps
NOTE: Latitude 7230 Rugged Extreme Tablet features three configurations for the front camera and microphone assembly:
a. Front camera and microphone assembly
b. Microphone and bracket (without front camera)
c. Bracket only (without front camera and microphone)
NOTE: If any component in the assembly is faulty, you must replace the entire assembly.
1. For a and b configurations, disconnect the front-camera FPC or microphone FPC from the connector on the system board.
2. Remove the two screws (M2x3) that secure the bracket to the tablet.
3. Remove the front camera and microphone assembly away from the tablet.

Installing the front camera and microphone assembly

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The figure indicates the location of the front camera and microphone assembly and provides a visual representation of the
installation procedure.
66 Removing and installing components