Dell Latitude 7230 Service Manual page 90

Table 14. System setup options—Update, Recovery menu (continued)
Update, Recovery
BIOSConnect
Dell Auto operating system Recovery
Threshold
Table 15. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Wake on LAN
Wake on LAN
Auto on Time
Diagnostics
Power-on-Self-Test Automatic
Recovery
Table 16. System setup options—Keyboard menu
Keyboard
Fn Lock Options
Lock Mode
Keyboard Illumination
Keyboard Backlight Timeout on AC
90 BIOS setup
Enable or disable cloud Service operating system recovery if the main operating
system fails to boot with the number of failures equal to or greater than the
value specified by the Auto operating system Recovery Threshold setup option
and local Service operating system does not boot or is not installed.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell operating system Recovery Tool.
By default, the threshold value is set to 2.
Displays the Service Tag of the system.
Create a system Asset Tag.
Enable or disable the wake on AC option.
By default, the option is disabled.
Enable or disable the system to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the system to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
When enabled, Dell Operating System Agents will be capable of scheduling
onboard diagnostics on a subsequent boot which can help assist in the
prevention and resolution of hardware related issues.
By default, the option is enabled.
When enabled, if the computer should become unresponsive before completing
the BIOSPower-On-Self-Test (POST), the BIOS will attempt to automatically
recover the computer.
By default, the option is enabled.
By default, the Fn lock option is enabled.
By default, the Lock Mode Secondary option is enabled. With this option, the
F1-F2 keys scan the code for their secondary functions.
Enables to change the keyboard illumination settings.
By default, the Level is 100% option is enabled.
Set the timeout value for the keyboard backlight when an AC adapter is
connected to the system.
By default, the 10 seconds option is enabled.