Steps
NOTE:
For models shipped with a world-facing camera.
1. Peel the gasket at the top-left side of the system-board shielding cover.
2. Remove the three screws (M2x3) that secure the camera-connector bracket to the system board.
3. Remove the camera-connector bracket away from the tablet.
4. Disconnect the world-facing camera FPC from the connector on the system board.
5. Remove the two screws (M2x3) that secure the world-facing camera to the tablet.
6. Remove the world-facing camera away from the tablet.
Installing the world-facing camera
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
54
Removing and installing components