6. Adhere the conductive tape to the I/O daughter-board FPC.
Next steps
1. Install the
back-cover
2. Install the batteries.
3. Install the
handle
(for models shipped with handle).
4. Install the stylus.
5. Follow the procedure in
USB/HDMI port
Removing the USB/HDMI port
Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the
handle
(for the models shipped with a handle).
4. Remove the batteries.
5. Remove the
back-cover
About this task
The figure indicates the location of the USB/HDMI port and provides a visual representation of the removal procedure.
40
Removing and installing components
assembly.
after working inside your
before working inside your
assembly.
tablet.
tablet.