Steps
1. Align the screw holes on the scanner module with the screw holes on the tablet.
2. Replace the four screws (M2x5) to secure the scanner module to the tablet.
Next steps
1. Install the
decoder
daughter-board.
2. Install the
back-cover
3. Install the batteries.
4. Install the
handle
(for models shipped with handle).
5. Install the stylus.
6. Follow the procedure in
Front camera and microphone assembly
Removing the front camera and microphone assembly
Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the
handle
(for the models shipped with a handle).
4. Remove the batteries.
5. Remove the
back-cover
6. Remove the
world-facing
About this task
The figure indicates the location of the front camera and microphone assembly and provides a visual representation of the
removal procedure.
assembly.
after working inside your
before working inside your
assembly.
camera.
tablet.
tablet.
Removing and installing components
65