Steps
1. Align the screw holes on the USB/HDMI door with the screw holes on the back cover.
2. Replace the two screws (M2x2) to secure the USB/HDMI door to the back cover.
Next steps
1. Install the
back-cover
2. Install the batteries.
3. Install the
handle
(for models shipped with handle).
4. Install the stylus.
5. Follow the procedure in
Scanner assembly
Removing the scanner assembly
Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the
handle
(for the models shipped with a handle).
4. Remove the batteries.
5. Remove the
back-cover
6. Remove the
decoder
About this task
The figure indicates the location of the scanner assembly and provides a visual representation of the removal procedure.
assembly.
after working inside your
before working inside your
assembly.
daughter-board.
tablet.
tablet.
Removing and installing components
63