Usb/Hdmi Door; Removing The Usb/Hdmi Door - Dell Latitude 7230 Service Manual

Steps
1. Adhere the coin-cell battery to the slot on the system board.
2. Route the coin-cell battery cable through the routing guides along the left side of the system board.
3. Connect the coin-cell battery cable to the connector on the system board.
4. Connect the USB/HDMI port cable to the connector on the system board.
5. Align the screw holes on the USB/HDMI port bracket with the screw holes on the system board.
6. Replace the two screws (M2x3) to secure the USB/HDMI port bracket in place.
Next steps
1. Install the back-cover
2. Install the batteries.
3. Install the handle (for models shipped with handle).
4. Install the stylus.
5. Follow the procedure in

USB/HDMI door

Removing the USB/HDMI door

Prerequisites
1. Follow the procedure in
2. Remove the stylus.
3. Remove the handle (for the models shipped with a handle).
4. Remove the batteries.
5. Remove the back-cover
About this task
The figure indicates the location of the USB/HDMI door and provides a visual representation of the removal procedure.
assembly.
after working inside your
before working inside your
assembly.
tablet.
tablet.
Removing and installing components 61