Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Restricted numbers
FF10-(PASSWORD)#-3#-2#-(1-8)#-(0000-9999)#
(1-8)#
List number
1 and 2 are fixed
3 to 8 are programmable
A list of 8 numbers which must always be sent via the directly connected network, E.g. emergency
numbers, can be stored. These numbers cannot be forced via carriers 1 to 7.
In default item 1 is set to 999 and 2 for 112, the emergency services and these cannot be
changed.
Call set-up protocols
FF10-(PASSWORD)#-4#-(1-7)#-(01-48)#-(1-4)#-(0-255)#
(1-7)#
Carrier
For each carrier and each line a list of commands governing the set up of call can be stored. Each
list consists of upto 4 items. When a call is to be made via a carrier the appropriate line protocol
list is selected and the system implements the instructions working down the list until the null (255)
setting is reached, at which point the call is set up. The instructions can be stored in any order
provided the end of list 255 is the last item.
The instructions are:
0
Covert from pulse/LD dialling to DTMF dialling after the network access code. This
is not required if the line is already DTMF dialling
1-48
The authorisation code to use from the list of codes available for the carrier
selected in the (1-7)# part of the step. Each carrier can have up to 48 different
authorisation codes.
203
Call serial number. This instruction will send 3 digit call serial numbers after the
authorisation code. These start at 001 and run to 998 before cycling round and
repeating. 112 and 999 are not sent as serial numbers.
213
A 3 digit cost centre code is sent to the network after the authorisation code. This
will be the extension number if three digit extension numbers are in use, the port
number if 2 or 4 digit numbers are in use or [
circuit.
Note:
203 and 213 are mutually exclusive. Only one may be used in a single 4 item list.
Note:
From v4.1 / ISDN 1.1 the display indication of KIND and TRK numbers is reversed.
(000-999)#
Restricted number
(01-48)#
(1-4)#
Line number
List item number
[4 DIGIT DIAL SET]
[LCR ADD KIND SET]
(0-255)#
Instruction
0 Convert LD dialling to DTMF
1-48 authorisation code number
203 3 digit call serial number
213 3 digit cost centre code
255 end of list
] if breaking out from a private
124
Issue 15
2.x
2.x / 4.1 / ISDN 1.2
Advertisement
Table of Contents
