Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Type of hunt group
(1-16)#
Hunt group number
An incoming call to an extension within the hunt group which is busy, it is automatically transferred
according to the order laid down in the hunt group table. The system supports 16 different hunt
groups. There are two types of hunt group.
1) Circular:
An incoming call to any extension within the hunt group which is busy will
automatically be transferred to the next extension in the hunt group table.
2) Terminal:
A call to member number 1 in the hung group will be automatically transferred to
the next free extension in the hunt group. If the last group member is busy the call
is terminated and the caller will receive busy tone. Call to other members of the
group will not hunt.
Note1: An incoming exchange line which rings a busy hunt group will hear ringing and not busy.
Note2: An extension can only belong to a single hunt group or single coverage group.
Hunt group transfer
To cancel the feature input [CONF]key.
If all the extensions in one hunting group are busy, the incoming call can be automatically
transferred to another hunt group. A hunt group into which automatic transfer is actually operating
cannot receive a call from a further hunt group.
Hunt group assignment to extension
(1-16)#
Hunt Group Number
A maximum of 8 extensions can belong to each hunt group. An incoming call to the group, is
transferred to the first free extension according to the order in which the extensions are stored.
An extension can only belong to one hunt group or one coverage group and cannot be stored
more than once. If an entry is rejected check that it has not been stored against another group.
FF4-4#-(1-16)#-1#-(0 or 1)#
FF4-4#-(1-16)#-2#-(1-16)#
From
FF4-4#-(1-16)#-(3-10)#-(Ext No.)#
(3-10)#
3#: Member 1
4#: Member 2
5#: Member 3
6#: Member 4
7#: Member 5
8#: Member 6
9#: Member 7
10#: Member 8
98
[HUNTING MODE]
(0-1)#
0#: Terminate
1#: Circular
[NEXT HUNT GROUP]
To
[MEMBER EXT.#]
(Ext No.)#
Extension Number
Conf# to clear stored number
Issue 15
2.x
2.x
2.x
Advertisement
Table of Contents
