Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
DDI Enable
0#
Disabled
1#
Enabled
This step controls the DDI functions of the DASS II software in the DBS. To use DDI this step must
be enabled.
Action When Incoming DDI Destination Is Busy
0#
Transfer To Operator
1#
Terminate Call
When the incoming DDI call destination is unable to take the call the system will transfer the call
to the operator or terminate it. The destination is unable to take the call if the extension is busy.
Step is removed and no longer used from the CPC-EX v1.5 level of software, it is replaced by DDI
Busy No Answer Mode.
Related Step:
FF1 6# 5# 4# - DDI Busy / No Answer Mode
FF1 6# 5# 5# - DDI Busy No Answer Transfer Mode
Action When Unrecognised DDI Is Received
0#
Transfer To Operator
1#
Terminate Call
The action to take when an unrecognised DDI number is received. Step is removed and no longer
used from the CPC-EX v1.5 level of software, it is replaced by DDI Busy No Answer Mode.
Related Step:
FF1 6# 5# 4# - DDI Busy / No Answer Mode
FF1 6# 5# 5# - DDI Busy No Answer Transfer Mode
Action When An Incoming DDI Call Is Unanswered
0#
Transfer To Operator
1#
Terminate Call
This determines the action to take when an incoming DDI remains unanswered after the DDI
answer timer has expired.
Related Step: FF1 6# 3# 7# (0-15)# -Timer For Unanswered Incoming DDI Call
FF1 6# 4# 1# (0-1)#
FF1 6# 4# 2# (0-1)#
FF1 6# 4# 3# (0-1)#
FF1 6# 4# 4# (0-1)#
54
Issue 15
ISDN 1.0
ISDN 1.0 / CPC-EX v1.5
ISDN 1.0 / CPC-EX v1.5
ISDN 1.0
Advertisement
Table of Contents
