Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Default DDI Number For DISA Break Out
(12-16)#
12#
13#
14#
15#
16#
The DDI number for DISA breaking out over DASS II using the transfer ID codes can be specified
here for use when outgoing DDI data is required to be sent to the network.
Sub-address Busy Mode
If the sub address destination is busy this step control the action of the system when handling the
call.
Sub-address Misdial Mode
If the sub address destination is not recognized as a valid extension this step control the action of
the system when handling the call.
Sub-address No Answer Mode
If the sub address destination is not answered before the no answer timer elapses this step control
the action of the system when handling the call.
Related Step: FF1 6# 3# 8# - Sub-address No Answer Timer
Sub-address Incoming Ring Pattern
1# 0.375 Sec. On / 0.25 Sec. Off / 0.375 Sec. On / 2 Sec. Off
2# 1 Sec. On / 2 Sec. Off
3# 0.25 Sec. On / 0.25 Sec. Off / 0.25 Sec. On / 0.25 Sec. Off / 0.25 Sec. On / 4.75 Sec. Off
The incoming ringing pattern used by sub-addressed calls can be selected.
FF1 6# 4# (12-16)# (0-999999)#
DISA ID Used
DISA Break Out Using ID1
DISA Break Out Using ID2
DISA Break Out Using ID3
DISA Break Out Using ID4
DISA Break Out Using ID5
FF1 6# 4# 17# (0-1)#
0# Ring To Operator Extension
1# Terminate The Call
FF1 6# 4# 18# (0-1)#
0# Ring To Operator Extension
1# Terminate The Call
FF1 6# 4# 19# (0-1)#
0# Ring To Operator Extension
1# Terminate The Call
FF1 6# 4# 20# (1-3)#
(0-999999)#
CONF#
56
Issue 15
CPC-EX 1.0
Default DDI Number
Clear
CPC-EX v1.5
CPC-EX v1.5
CPC-EX v1.5
CPC-EX v1.5
Advertisement
Table of Contents
