Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
System-call hold reminder-park hold
0#: Recall 3 minutes after an exchange line call put on park hold by an extension.
1#: Recall 20 secs. after an exchange line call put on park hold by an extension
2#: Recall 40 secs.
3#: Recall 60 secs.
4#: Recall 80 secs.
5#: Recall 100 secs.
6#: Recall 120 secs.
7#: Recall 140 secs.
8#: Recall 160 secs.
9#: Recall 180 secs.
10#: Recall 200 secs.
11#: Recall 220 secs.
12#: Recall 240 secs.
If an exchange line is put on call park hold by an extension is not returned to within the specified
time after having been put on hold, the warning tone starts to sound to indicate that the time has
been exceeded. The hold reminder can be set within the range of 20-240 seconds.
Call reversion to operator
0#: No call reversion to the operator after an exchange line put on hold
1#: Call reversion to the operator 20 seconds after an exchange line put on hold
2#: After 40 secs.
3#: After 60 secs.
4#: After 80 secs.
5#: After 100 secs.
6#: After 120 secs.
7#: After 140 secs.
8#: After 160 secs.
9#: After 180 secs.
10#: After 200 secs.
11#: After 220 secs.
12#: After 240 secs.
If an exchange line call which has been put on hold by an extension other than the operator, for
longer than the specified hold recall time it will sound a recall warning at the extension. If the
extension does not answer the recall warning the call will revert to the operator extension after the
time specified here. and the extension recall warning stops.
FF1-3#-13#-(0-12)#
FF1-3#-14#-(0-12)#
35
Issue 15
[PARK RECALL EXT]
[REVERSION TIMER]
2.x
2.x
Advertisement
Table of Contents
