Panasonic DBS Series Programming Manual page 50

Panasonic Digital Business System - Programming Manual
April 1997
Timer Setting For Incoming Calls
1# 0.5 sec
2# 1 sec
3# 1.5 sec
4# 2 sec
5# 3 sec
6# 4 sec
7# 5 sec
8# 6 sec
9# 8 Sec
10# 10 sec
11# 12 sec
12# 14 sec
13# 16 sec
14# 20 sec
15# 25 sec
This sets the time the system will wait for Call Answer Message (CAM) from the network after
sending Call Answer (CA) before disconnecting the call. In this case the call is considered to have
been a false call.
Timer For Answer On Outgoing Calls
0# 0 sec
1# 15 sec
2# 30 sec
3# 45 sec
4# 60 sec
5# 75 sec
6# 90 sec
7# 105 sec
8# 120 sec
9# 135 sec
10# 150 sec
11# 170 sec
12# 190 sec
13# 210 sec
14# 230 sec
15# 250 sec
This is the time the system will wait for the Call Connect Message (CCM) answer signal from the
network before disconnecting the line.
FF1 6# 3# 1# (1-15)#
FF1 6# 3# 2# (0-15)#
50
Issue 15
ISDN 1.0
ISDN 1.0