Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Call logging - Alarm data/Service data output
0#:
Alarm data, Service data output
1#:
Alarm data output
2#:
Service data output
3#:
Alarm data, Service data output
This specifies whether the alarm data and/or service data is to be output to a call logger.
Port 2 - parity check
Port 2 - even/odd parity
Port 2 - baud rate
Port 2 - stop bit
Port 2 - data length
FF1-2#-2#-12#-(0-3)#
FF1-2#-2#-13#-(0 or 1)#
0#: No parity check
1#: Parity check
FF1-2#-2#-14#-(0 or 1)#
0#: Odd parity
1#: Even parity
FF1-2#-2#-15#-(1-4)#
1#: 300 bps
2#: 1200 bps
3#: 4800 bps
4#: 9600 bps
5# 19200 bps
FF1-2#-2#-16#-(1-3)#
1#: 1 bit
2#: 1.5 bit
3#: 2 bit
FF1-2#-2#-17#-(1-4)#
1#: 5 bits
(cannot be set)
2#: 6 bits
(cannot be set)
3#: 7 bits
4#: 8 bits
26
Issue 15
[SMDR ALM/SERVIC]
CPC-EX 1.0
[TTY PARITY]
CPC-EX 1.0
[MODE ODD0/EVEN1]
CPC-EX 1.0
[BAUD RATE1:5]
CPC-EX 1.0
[STOP BIT1:3]
CPC-EX 1.0
[DATA LENGTH 3:4]
4.0
Advertisement
Table of Contents
