Panasonic DBS Series Programming Manual page 42

Panasonic Digital Business System - Programming Manual
April 1997
Internal call/E&M Line Hunting Recall Timer for Operator
0#: No recall after transfer
1#: Recall 20-sec after transfer
2#: Recall 40-sec after transfer
3#: Recall 60-sec after transfer
4#: Recall 80-sec after transfer
5#: Recall 100-sec after transfer
6#: Recall 120-sec after transfer
7#: Recall 140-sec after transfer
8#: Recall 160-sec after transfer
9#: Recall 180-sec after transfer
10#: Recall 200-sec after transfer
11#: Recall 220-sec after transfer
12#: Recall 240-sec after transfer
13#: Recall 240-sec after transfer
14#: Recall 240-sec after transfer
15#: Recall 240-sec after transfer
If a transferred intercom call or E&M line call is not answered by a hunting group member within
the specified time after having been put on hold from an operator phone , the call rings back to the
operators extension. This setting is only applicable to operator phones.
Internal call/E&M Line Hunting Recall Timer for Extensions
0#: No recall after transfer
1#: Recall 20-sec after transfer
2#: Recall 40-sec after transfer
3#: Recall 60-sec after transfer
4#: Recall 80-sec after transfer
5#: Recall 100-sec after transfer
6#: Recall 120-sec after transfer
7#: Recall 140-sec after transfer
8#: Recall 160-sec after transfer
9#: Recall 180-sec after transfer
10#: Recall 200-sec after transfer
11#: Recall 220-sec after transfer
12#: Recall 240-sec after transfer
13#: Recall 240-sec after transfer
14#: Recall 240-sec after transfer
15#: Recall 240-sec after transfer
If a transferred intercom call or E&M line call is not answered by a hunting group member within
the specified time after having been put on hold from a extension phone , the call rings back to the
extension. This setting is only applicable to extension phones.
FF1-3#-32#-(0-15)#
FF1-3#-33#-(0-15)#
42
Issue 15
[INT HNT RCL ATT]
[INT HNT RCL EXT]
3.1
3.1