Panasonic DBS Series Programming Manual page 45

Panasonic Digital Business System - Programming Manual
April 1997
ID code-remote programming
[CONF]#:
(0000-9999)#: Remote code.
Remote programming of the system can be done through a telephone line when the optional
Remote Administration Interface (RAI) card is fitted. This step stores a 4 digit ID code to restrict
access to authorised persons only.
ID code-system programming
[CONF]#:
(0000-9999)#: ID Code
By default, system programming is only possible from the operator phone. But by dialling 78 and
this code at a display key telephone, the extension is enabled as a programming telephone.
Dialling the sequence a second time disables the extension as a programming telephone. Only
one extension can be enabled at one time.
DISA Transfer ID
(1,3,5,7,9)#
1# DISA TRF ID 1
3# DISA TRF ID 2
5# DISA TRF ID 3
7# DISA TRF ID 4
9# DISA TRF ID 5
Store upto 5 DISA breakout IDs for use by external callers on DISA lines. This ID is required when
using DISA to break out of the DBS. If no IDs are stored the DISA breakout facility is disabled.
DISA Transfer ID Tenant Group
(2,4,6,8,10)#
1# DISA TRF ID 1
3# DISA TRF ID 2
5# DISA TRF ID 3
7# DISA TRF ID 4
9# DISA TRF ID 5
Assign a tenant group to use for each of the DISA TRF IDs in use. This is used to select a line by
9 access when breaking out.
FF1-4#-1#-(0000-9999)#
Clear to initial DATA (9999)
FF1-4#-2#-(0000-9999)#
Set default code 9999
FF1 4# 4# (1,3,5,7,9)# (0000-9999)#
FF1 4# 4# (2,4,6,8,10)# (1-8)#
[SET 4DIGIT DATA]
[SET 4DIGIT DATA]
(0000-9999)#
4 digit ID code
(1-8)#
Tenant Group
45
Issue 15
CPC-EX 1.0
CPC-EX 1.0
CPC-EX 1.0
CPC-EX 1.0