Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Line Group 0
0#: Not subject to line group 0
1#: Accessible through line group 0
This program allocates which lines are available to line group 0. these lines are accessed by
dialling "9". Lines which are allocated to this group can be sub divided into tenant groups to allow
multiple department systems to have each department access their own lines when members dial
'9'.
Note:
A line already defined as Dedicated Line to an extension cannot be put in the Groups.
Related steps
FF2 1# (01-48)# 25# , Exchange line tenant group setting
FF3 (001-144)# 36# , Extension tenant group setting
Line groupings
(4-9)#
4#: Line group 1
5#: Line group 2
6#: Line group 3
7#: Line group 4
8#: Line group 5
9#: Line group 6
Sets which exchange lines are available to which line group or groups. A line group can be
selected for dialling using the command 81 followed by the group number (1-6).
Note:
A line already defined as Dedicated Line to an extension cannot be put in the Groups.
Piggy backing to PBX
0#: Exchange line
1#: PBX line
This step determines the line type of each exchange line port. When the system is configured as a
subsidiary to a host PBX set this to 'PBX line' for the system to handle PBX access codes,
pauses, recall signals ,and call barring settings correctly.
FF2-1#-(01-48)#-3#-(0 or 1)#
FF2-1#-(01-48)#-(4-9)#-(0 or 1)#
FF2-1#-(01-48)#-10#-(0 or 1)#
75
[MCO GROUP '0']
[MCO GROUP '1'-'6']
(0-1)#
0#: Not subject to line group
1#: Accessible through line group
[TRUNK TYPE]
Issue 15
2.x
2.x
2.x
Advertisement
Table of Contents
