Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Storing authorisation codes for network operators
FF10-(PASSWORD)#-5#-(1-7)#-(1-48)#-(0-99..99)#
(1-7)#
Carrier
A list of up to 48 different authorisation codes each of up to 16 digits can be stored for each
network operator. The list number is the reference used to select the authorisation code in the call
set up protocol list.
LCR look up tables
FF10-(PASSWORD)#-6#-(1-7)#-(000-999)#-(0 or 1)#
(1-7)#
Carrier
This step allows the look up table for each carrier to be set. The STD code entered excludes the
first digit of STD dialling as set under call barring. When the system is set for NCC the STD data
becomes 4 digits. By default the codes for carrier 1 are set ready for Mercury access and will
require the installation's local codes to be set 'Not used'.
Priority table setting
FF10-(PASSWORD)#-7#-(1-4)#-(000-999)#-(1-8)#
(1-4)#
Priority table number
The system contains 4 priority tables in which the carrier for each STD code can be specified.
When entering the numbers wildcards can be used to block program. The wildcard character is *
and entered using the FF11 key. It represents all numbers in the location it is entered. If the
entered number is less than three digits long the remaining locations are filled by the wildcard
character. Thus:
00* is equivalent to 00# which represents numbers 000 - 009
0** is equivalent to 0# which represents numbers 000 - 090
Note:
Initial setting for all dial numbers for the priority table No.1 is carrier 1 (Mercury). Initial
setting for all dial numbers for the priority tables No.2-4 is BT.
(1-48)#
List number
(000-999)#
STD code excluding
first digit of STD national
dialling setting
(000-999)#
STD data
excluding first STD
national digit
125
Issue 15
[NO.01 SET 16 DIGIT]
(0-99..99)#
Authorisation code
maximum 16 digits
[SELECT DIAL]
(0-1)#
0#: Not Used
1#: Used
[SET DIAL ]
(1-8)#
Carrier
2.x
2.x
2.x
Advertisement
Table of Contents
