Panasonic DBS Series Programming Manual page 96

Panasonic Digital Business System - Programming Manual
April 1997
Assignment Of Extension To Work With BLF DSS
The BLF DSS uses the existing DSS console as an extended BLF unit which can be assigned to
work with any non-operator key station. The BLF DSS will not operate in conjunction with the
VB3011 or an SLT and any keyset can only have 1 BLF DSS unit associated with it. Up to four
such BLF DSS units can be assigned for the system. This is in addition to the Operator positions
which can still have 2 fully functioning DSS consoles at each of the two Operator positions as with
previous software versions.
When used as a keyset BLF DSS the console will operate only as a BLF. Single key transfer will
operate, but extension pick up will not be supported.
On Hook Transfer To Trunk
Transferring of calls to outgoing trunks can be disabled for extension users who do not require or
are not permitted to use this feature.
Related Step: FF1 2# 5# - Cross Connection Permissions
FF3 (1-144)# 41# (0-4)#
(1-144)#
Extension Port
FF3 (1-144)# 42# (0-1)#
0# Disabled
1# Enabled
(0-4)#
0# No BLF DSS associated
1# Works with BLF DSS 1
2# Works with BLF DSS 2
3# Works with BLF DSS 3
4# Works with BLF DSS 4
96
Issue 15
CPC-EX 1.0
CPC-EX v1.5