Table of Contents
Advertisement
Panasonic Digital Business System - Programming Manual
April 1997
Setting For RAM Transfer From CPC-B
NNNN#
DBS Programming ID Code
This step is used to set up the CPC-EX ready to accept a RAM transfer using the RAM Transfer
Card, from the earlier CPC-B v3.2, v4.x or CPC-EX central processor card when upgrading a
DBS. RAM transfer from the CPC-C card or CPC-B v2.x, v3.0 and v3.1 is not possible.
To perform the transfer:
1
Copy old software settings to the RAM transfer card
2
Install CPC-EX and load default data settings
3
Power off and install RAM transfer card set to upload its data to the CPC-EX
4
Power on and allow transfer to take place
5
Power off, remove RAM transfer card and power on
6
System should be running normally and ready for additional programming
7
Set this step according to the software level previously used and nothing else
8
Power off and on to fully load programming
Auto night mode
[CONF]#: No automatic switching to night mode
(HHMM)#: Time in 24hr format to switch to night mode
Set the time for switching automatically from day mode to night mode. When this is not set the
switch over can only be made manually from the operator extension.
Related step
FF4-2#-(001-144)#-(01-48)# , Incoming ring-night mode .
Operator-call on hold reminder-exchange lines
0#: No recall after an exchange line call put on hold by the operator.
1#: Recall 20 secs
2#: Recall 40 secs.
3#: Recall 60 secs.
4#: Recall 80 secs.
5#: Recall 100 secs.
6#: Recall 120 secs.
7#: Recall 140 secs.
8#: Recall 160 secs.
9#: Recall 180 secs.
10#: Recall 200 secs.
11#: Recall 220 secs.
12#: Recall 240 secs.
If an exchange line call is put on hold by the operator a hold recall warning sounds after the time
specified here. This setting is only applicable to the operator extensions.
FF1 2# 6# NNNN# (1-5)#
(3-5)#
3#
4#
5#
6#
7#
8#
FF1-3#-1#-(HHMM)#
FF1-3#-2#-(0-12)#
29
Issue 15
CPC-EX 1.0 / 1.5 / 2.1
From v3.2 to CPC-EX
From v4.0 to CPC-EX
From v4.1 to CPC-EX
From CPC-EX v1.1
From CPC-EX v1.3
From CPC-EX v2.0
[NIGHT START TIM]
[CO HOLD REC ATT]
2.x
2.x
Advertisement
Table of Contents
