Advertisement
Heat to set temperature
Microwave heating using infrared sensors to
heat food
Serving size is based on one person (150g as the basis)
Example: softened butter
1
Put the food in
• Put it into a shallow-mouth heat-resistant container corresponding to the serving size of
food that can be used in the microwave, with O as the standard, and put it in the center of
the oven.
• When the oven is very hot, please heat it after sufficient cooling. (When the oven is very hot,
the infrared sensor may not operate normally)
2
Select constant temperature
heating
Press 6
times
3
Adjust the temperature from -10~90°C
Turning
• Please refer to the right page for setting temperature standards.
• Serving size is based on one person (150g as the basis)
Set the temperature higher when serving more and lower when serving less.
• Do not set the temperature above 50°C for food less than 100g.
4
Start (start heating)
Press
If the buzzer sounds 3 times, the heating is completed
• The buzzer will sound when you forget to take out the food. (1 minute, 3 minutes, and 5 minutes later), open the
oven door or press "Cancel" to stop it.
When it is desired to continue heating after completion (extend the time)
→ Turn the knob within 3 minutes after cooking, then set the time and heat while observing
Cooking temperature cannot be changed during cooking
Notifications
• The infrared sensor is used to read the surface temperature of food, and its interior
may be different from the set temperature. The temperature inside the food may
be higher or lower than the set temperature due to the type and thickness of food,
seasonings, etc.
• The effect temperature may vary depending on the container size, shape and
material.
※ If the use method is incorrect, the effect may not be good. In addition, it may cause
food to burn, smoke and catch fire.
Each time it is pressed, it switches in the following order
P.16
36
Do not use a baking tray or grill
No plastic film or cover required
Constant
Microwave
temperature
Stewing
heating
If the set temperature
is different, some
menus may display
the remaining time
halfway.
Examples of detection images
of infrared sensors and their
placement methods
Placed in the
center
微波
定溫加熱
C
微波
定溫加熱
秒
P.7
Advertisement
