Advertisement
When the following is displayed
When the displayed content is marked with
z
The following display is not a fault. Please handle as appropriate.
Display
門
The following display is not a fault. Please handle as appropriate.
Display the number (for example)
, it indicates that it is blinking.
Reason
Close the oven door, and press "Heating Start"
z
after more than 1 min to display.
When the preheating is completed and after
z
the buzzing sound prompting turnover is
given during automatic cooking, the start will
be displayed if the oven door is not opened/
closed.
After the heating is completed, a prompt will
z
appear that the fan is rotating to cool the
electrical components. (The fan sounds but
does not heat.)
It indicates that there is no water in the water
z
filling box.
When there is water in the water filling box, it
z
may not be able to fill water normally.
After heating by heating pipe is completed,
z
it prompts high interior temperature. (After
about 15~20 min, the display will disappear.
The cooling speed is faster after opening the
oven door. Press "Cancel" or set the automatic
menu, and then the display will disappear.)
It indicates that the start fails due to high
z
interior temperature. It is not a fault.
[Display menu example]
Fermentation/Japanese Egg Steaming/
Start Menu (3 min)/Automatic
Heating/Constant Temperature Heating/3
Thaw Methods
(Menus that cannot provide smooth heating
and menus using infrared sensors when the
interior temperature is high)
Press "Cancel", and the display will disappear. (There are also numbers that will not disappear.)
When displayed repeatedly, a fault may occur. Please inform the sales store or our consulting
center of the error code.
(00 is a two-digit number)
Please press the button within 1 min after
z
opening/closing the oven door again.
Please close the oven door after operation
z
according to the Cuisine Collection, and
press "Heating Start".
It shows that cooking is also possible
z
during "
In case of high temperature in the oven,
C21 will be displayed on some menus,
and it is necessary to wait for the interior
temperature to drop.
Please fill water to the water filling box
z
and install it properly. After 1~3 min, the
water shortage display will disappear and
cooking will continue.
Please insert the water filling box to the
z
bottom.
Heating with heating pipe and manual
z
microwave heating can also be used during
display. (However, the heating pipe may
not be set above 220°C when heating.)
Beware of scalds and containers with low
temperature resistance when cooking.
It may not start due to the high interior
z
temperature. (hereinafter referred to as
高溫
"C21,
At this time, please open the oven door and
wait for the temperature to drop.
Please press "Cancel" and open the oven
z
door to wait for the temperature to drop.
If "Cancel" is still pressed after C21 is
displayed, C21 display will disappear and
manual "Microwave" mode can be used.
55
Countermeasures
".
冷卻
")
Advertisement
