Advertisement
Name and function of each part (continued)
[Front]
Handle
Water filling box
This is a vessel that supplies water to steam.
It shall also be installed on the main unit when not in use.
The amount of water reduced varies depending on the
program and menu, and short-term steam microwaves
may only reduce a small amount of water.
Prepare to add water (when cooking with steam)
Water-adding method
• When cooking with steam, open the cover, and add
water to the filling box.
Water box cover
Water box cover
• Removable
• Please make sure that the water box cap and water
box cover are firmly closed.
Installation and removal methods
Press to the bottom
• Make sure the cover is securely closed to prevent water
leakage.
• When tilting, it may cause water to overflow. Therefore,
please always keep it horizontal for operation.
• Please be sure to discard the residual water after use.
• Be careful not to pinch your fingers during installation.
• Please make sure that the water tank is installed in
place, otherwise the unit will display a lack of water and
the steam function effect cannot be guaranteed.
Water box cap
Maximum water level
(Beyond this line,
overflow may occur)
10
Display
Operation interface
Power cord
Power supply plug
Water collecting box
This is a container that collects food debris and water
droplets, steamed water, etc.
Moisture that evaporates from food during microwave
heating will accumulate.
It shall also be installed on the main unit when steam
function is not used.
Please clean and maintain
carefully.
P.47
Installation and removal methods
• Make sure it is firmly installed before cooking. If the
installation is not firm, there may be water leakage.
• Make sure that there is no accumulated water before
using steam.
• Please note that water may accumulate during removal.
• After using the steam function, please remember to
pour out the accumulated water every time.
• Be careful not to pinch your fingers during installation.
Water will accumulate
in this part
Advertisement
