Siemens SIMATIC S7-1500 System Manual page 58

Result: You have configured the transfer of syslog messages to a syslog server.
Figure 4-3
Selecting the client certificate
STEP 7 provides the required client certificate for a CPU for the TLS transport protocol. If the
certificate is managed within the CPU, you can either choose an existing certificate or create
a new certificate. To do so, follow these steps:
1. Select the required CPU in the device or network view of STEP 7.
2. In the Inspector window, navigate to "Properties > Protection & Security > Syslog >
Certificates for Syslog".
3. Select the appropriate certificate in the "Client certificate" field.
S7-1500R/H redundant system
System Manual, 01/2024, A5E41814787-AF
Transfer of syslog messages to a syslog server configured
Industrial cybersecurity
4.9 Secure operation of CPUs
57