Advertisement
Using PHS as a
Receiver
You can use an optional PHS as a receiver of Softphone.
In order to use this function, you need to set
the service function on the PBX in advance.
For details, contact your system administra-
tor.
Be careful that the current version is under
the following constraints:
• There are following three types in the
cooperation with PHS:
a: no cooperation with PHS
b: cooperation with PHS (Using PHS ter-
minal)
c: cooperation with PHS (Not using PHS
terminal)
- In the case of the above 'b', application
sharing/video conference is cut when
PHS is cut.
- If you or other person use(s) the above
'b', it is impossible to share application
or have a video conference with a per-
son forwarded by the third party.
- If other person uses the above 'b', spec-
ify the PHS number to send a short
message.
- Application sharing/video conference
can be executed only in the combina-
tions of above 'a' and 'c' or 'b' and 'c'.
In the case of the combination of 'a'
and 'b', an error message is displayed
and neither of them can be executed.
Making a Call through
PHS (Cooperation with
PHS)
(optional)
You can enter other person's number either through
PHS or Softphone.
Entering Phone Number on PHS
1
Press the other person's number on
PHS.
2
Press [Call] Button on PHS.
Other person's number is displayed on LCD of
Softphone and ringback tone is heard from PHS.
3
Speak with other person when he or
she answers.
When the call is ended, press [End] key on
the PHS.
Entering a Phone Number by Using Softphone
1
Click the upper side of LCD.
Then, the cursor blinks.
2
Enter other person's number on Key-
board.
The entered number is displayed on LCD.
3
Press [Enter] key.
Ringback tone is heard from PHS.
4
Press [Call] Button on PHS.
Ringback is heard from PHS.
Using PHS as a Receiver
Click
37
Advertisement
