Advertisement
Answering the Call Again
1
A call is being held.
2
Press [Call] Button on PHS.
3
Click the Line Button which blinks
because Softphone is being held.
4
Speak with other person.
When the call is ended, press [End] key on
the PHS.
Switching a Receiver to the
Handset Connected to PC
You can switch a receiver of PHS to the handset con-
nected to a PC.
• You cannot switch when Softphone or
PHS is under one of the following condi-
tions:
- When receiving a call
- When sending a call
- When the line is busy
• Even if you switch to the handset con-
nected to PC, a call is sent or received
through the extension number of PHS. A
call cannot be sent or received through
the extension number of Softphone.
• When this service is set in the PBX, the
available receiver is PHS at starting Soft-
phone.
1
Click
(Function Key Button).
Function Key Panel is displayed.
2
Click
ing Button).
The button blinks in red.
(Handset Switch-
Now, the handset connected to the PC can
be used as a receiver.
You want to return the receiver to
PHS:
Click Handset Switching Button. Every
time you click the button, the receiver/
handset is changed.
Using PHS as a Receiver
39
Advertisement
