HP D7171A - NetServer - LPr Installation Manual page 149

Chapter 13
Figure 13-9. Removing the Mounting Handles
6. Release the slide locks and push the mounted server into the rack. The
server will lock into place. Push the server to the first notch on the blue
rack latch position (see Figures 13-10 and 13-11). The second latch
position is used when mounting the HP NetServer in a non-HP rack.
WARNING
Do not slide the NetServer into rack when the bezel is in the
closed position. Always open the bezel before sliding the
server out of the rack.
Alternative Rack Mounting
141