HP D7171A - NetServer - LPr Installation Manual page 94

Chapter 8 Mounting the HP NetServer in an HP Rack System/E or Rack System/U
6. Release the slide locks, and push the mounted server into the rack. The
server will lock into place. Push the server to the first notch on the blue
rack latch position closest to the bezel (see Figures 8-9 and 8-10). The
second latch position is used when mounting the HP NetServer in a
non-HP rack.
WARNING
Do not slide the NetServer into rack when the bezel is in the
closed position. Always open the bezel before sliding the
server out of the rack.
86
Figure 8-8. Removing the Handles