Appendix Dstatus Monitor Messages - NEC SuperScript 1800 User Manual

APPENDIX D
STATUS MONITOR
MESSAGES
Computers running Windows 95 or 98 can use the
SuperScript 1800 Status Monitor for monitoring the
operational state of the printer. The table in this appendix
explains each message that can appear in the Status Monitor.
The Status Monitor cannot be used to monitor printers
connected through a network, serial, or infrared connection.
The first column of the table lists all the images that can be
displayed by the Status Monitor. The second column lists the
message that appears at the bottom of the Status Monitor
window for that image. The third column describes what
needs to be done to solve the problem.
For information about installing the Status Monitor, see
Chapter 3, "Installing the Software." For information about
using the Status Monitor, see Chapter 4, "Printer Software."
Displayed Status
Image Message
Ready
Offline
Printing
Corrective Action
None
Press the Go/Continue
button on the printer.
None
Displayed Status
Image Message
Power Save Mode
Hardware Error
Cover Open
or Install Cartridge
Toner Low
Toner Empty
Printing Error
Serial Error
Paper Jam
Tray 2 Empty
Corrective Action
None
There is a problem with
the printer's electronics.
Have a qualified technician
inspect the printer.
Assure the Top Cover is
completely closed or insert
toner cartridge.
The Toner Cartridge is
near empty. Be prepared to
replace Toner Cartridge.
Replace Toner Cartridge.
Visually inspect the printer
for anything unusual and/
or resend the print job.
Assure the serial printer
cable is connected
securely.
Open any trays or covers
to visually inspect for
jammed paper. Remove
jammed paper.
Fill Tray 2 (standard 500-
sheet Cassette) with paper.
121