NEC SuperScript 1800 User Manual page 63

Item Value
LEFT-MGN 0.0" ~ 9.9"
Landscape
0.0" ~6.5"
Portrait
DUPLEX OFF
LONG
SHORT
AUTO CR NO
YES
RESOLT 300
600
Explanation
This menu item lets you select
the left margin of the print
materials. Units are in inches.
note:
Adjusting the top
margin does not affect the
maximum printable area.
Instead it shifts where the
printable area begins and
ends.
This menu item is used to
choose the binding edge when
duplexing.
Use the OFF selection when
printing one sided.
note:
The printer can
automatically print on both
sides of the paper.
This menu item allows the user
to append the required carriage
return to each line feed.
The QUALITY setting
determines the print resolution
while printing the page.
CONFIG MENU
Use this menu to configure a variety of printer features.
Item Value
PERSONAL AUTO
PCL
PS
T-SWITCH ON
OFF
T-LOCK OFF
TRAY1
TRAY2
TRAY3
Explanation
Use to select the default
interpreter or emulator for
printing a document.
note:
PS is only
available if the
PostScript Option is
installed.
Tray Switch, if enabled,
will cause a job being
printed to switch to a tray
containing the same
media characteristics, if
the current tray runs out
of media.
note:
When paper
source is set to AUTO
this parameter is not
displayed.
Used to define the tray
that should not be used in
the case of Tray Switch.
note:
This setting is
only available if the
2nd Cassette Tray is
installed and the T-
SWITCH menu item is
set to ON.
Operator Panel Tasks 57