Nec Superscript 1800 Pcl5E Properties - NEC SuperScript 1800 User Manual

F P
INISHING ROPERTIES
Use the finishing properties for scaling the printed image to a
specific size. When in Normal mode, two or more pages can
be shrunk to fit on a single page, and when in scale mode, the
image of a single page can be stretched or shrunk to fit on a
sheet of paper.
P P
RINTER ROPERTIES
Use the printer properties for adjusting the printer resolution,
memory, and destination of your print job. A printing
resolution of 1200 dpi quality can be selected which uses SET.
Error reporting, and Toner Save Mode can also be controlled.
Use Toner Save Mode for saving printing toner by normally
printing all text in a print job, but dimming all the graphics.
O P
VERLAYS ROPERTIES
The overlays properties is very similar to watermarks. An
existing file can be selected as an overlay to be printed on
every page of the print job. For example, an overlay with
your company's trademark in the header and its address in
the footer can be used. Overlays can only be used by word
processors.
W P
ATERMARKS ROPERTIES
A watermark is text, such as "draft" or "confidential," that is
added to the printed page. Use these properties to apply
watermarks to your printed pages, create new ones, or
modify existing ones. Use the preview area viewing how the
watermark will appear on the printed page.
42 SuperScript 1800 — User's Guide

NEC SuperScript 1800 PCL5e Properties

The NEC SuperScript 1800 PCL5e properties window
contains tabs that divide the PCL6 driver properties into six
categories for computers running Windows 3.1x.
• Paper
• Printer Quality
• Fonts
• Device Options
Figures shown on the next page display each tab in the
NEC SuperScript 1800 PCL5e properties window.
P P
APER ROPERTIES
Use the paper properties for selecting how many copies to
make, which tray to use for paper, and the orientation of the
print.
Use Paper Size to tell the printer what size of paper is loaded
in the tray you want to use, and use Paper Type for telling the
printer the type of paper loaded in the tray.
P Q P
RINTER UALITY ROPERTIES
Use the printer quality properties for adjusting the graphic
mode, printer resolution, graphic quality, and grayscale of
your print job. Using NEC Sharp Edge Technology, the
printer resolution can be set to 1200 dpi quality.
Use Toner Save for saving printing toner by normally
printing all text in a print job, but dimming all the graphics.
F P
ONTS ROPERTIES
Fonts can be sent to the printer as TrueType or as Bitmaps.
D O P
EVICE PTIONS ROPERTIES
Use the device options properties for setting the amount of
memory installed in the printer, or whether duplex printing
must be used.