NEC SuperScript 1800 User Manual page 128

Displayed Status
Image Message
Tray 3 Empty
Tray 1 Empty
Paper Mismatch in
Tray 1
Load Paper into
Tray 1
Output Bin Full
Tray 2 Paper
Mismatch
Tray 3 Paper
Mismatch
Warming Up
122 SuperScript 1800 — User's Guide
Corrective Action
Fill Tray 3 (500-sheet 2nd
Cassette) with paper.
Fill Tray 1 (Multipurpose
Tray) with paper.
Configure the Operator
Panel so the printer can use
the paper size installed in
Tray 1 (Multipurpose
Tray).
Add paper to Tray 1
(Multipurpose Tray).
Remove paper from output
bin (Output Tray).
Configure the Operator
Panel so the printer can use
the paper size installed in
Tray 2 (500-sheet
Cassette).
Configure the Operator
Panel so the printer can use
the paper size installed in
Tray 3 (500-sheet 2nd
Cassette).
Wait until the Ready
message appears. The
printer will process print
jobs after reaching
operating temperature.
Displayed Status
Image Message
Insert Tray 2
Insert Tray 3
Invalid Cartridge
Check parallel cable.
†
The "Check parallel cable" message will also appear
when the printer is busy processing a print job that is
being received from an interface other than the parallel
port. For example, if print job is being received through
an Apple LocalTalk or IrDA interface, the printer will
delay the job using the parallel port until the one using
the other interface is completed.
Corrective Action
Assure Tray 2 (500-sheet
Cassette) is completely
inserted in the printer.
Assure Tray 3 (500-sheet
2nd Cassette) is
completely inserted in the
printer.
Replace existing toner
cartridge with a
SuperScript 1800 Toner
Cartridge, Order # 20-140.
To order a new one, call
800-632-2326.
Assure the parallel cable is
†
securely connected.