5.1.2.1 set host name
Overview
Menu location
Command
Output
5
SERVIS IP-Serial
102
1p Converter
User's Guide
Sets the host name.
MAIN MENU → 2. network → 1. set host name
None
When "s. save" is performed after setting this option, the
hostname command is executed and the setting is reflected.
Refer to
The host name is being set to "TEST".
--- 2. NETWORK MENU -----
1. set host name
->LL-1
2. set ip address
->192.168.0.169
3. set subnet mask
->255.255.255.0
4. set default gateway
->192.168.0.1
5. set snmp [ON]
s. save
0. return to MAIN MENU
--------------------------
select > 1
Enter
<set hostname>
change [LL-1] to : TEST
--- 2. NETWORK MENU -----<changed, not saved>
1. set host name
->TEST
2. set ip address
->192.168.0.169
3. set subnet mask
->255.255.255.0
4. set default gateway
->192.168.0.1
5. set snmp [ON]
s. save
0. return to MAIN MENU
--------------------------
select >
Notes
(1) The host name has a limit of 63 characters. Entering 64 or more
characters will result in an error.
(2) After setting this option, save using "s. save". This setting will not be
enabled if it is not saved.
(3) If Enter is pressed in a blank space, the current host name will be set.
4.1.5 hostname Command (page 57)
Enter