Fujitsu FX-3001SR User Manual page 168

Error Message
code
0006 ROM NG! erase XXX
Error Code 0006
0007 ROM NG! write XXX
Error Code 0007
0008 ROM NG! 0xXXXXXXXX 0xXXXXXXXX
0xXXXXXXXX Error Code 0008
7
0009 System program not found in FlashROM.
Error Code 0009
0010 File system not found in FlashROM.
Error Code 0010
0011 Self Diagnostic program not found in
FlashROM. Error Code 0011
SERVIS IP-Serial
158
1p Converter
User's Guide
Detail
Failed to erase the flash ROM during recovery.
The number is the block number that failed to erase
(decimal).
Solution:
Check the flash ROM using the self-diagnostic
program.
Contact our technical support.
Failed to write to the flash ROM during recovery.
The number is the block number that failed to write
(decimal).
Solution:
Check the flash ROM using the self-diagnostic
program.
Contact our technical support.
Failed to verify the flash ROM during recovery.
The first number is the written flash ROM address
(hexadecimal).
The second number is the written value
(hexadecimal).
The third number is the read value (hexadecimal).
Solution:
Check the flash ROM using the self-diagnostic
program.
Contact our technical support.
Attempted to boot the system program from the flash
ROM but the system program was not found in the
flash ROM.
Solution:
Contact our technical support.
Attempted to load the file system from the flash ROM
to SDRAM but the file system was not found in the
flash ROM.
Solution:
Contact our technical support.
Attempted to boot the self-diagnostic program from
the flash ROM but the self-diagnostic program was
not found in the flash ROM.
Solution:
Contact our technical support.