Writeflash Command - Fujitsu FX-3001SR User Manual

4.1.25

writeflash Command

Overview
Syntax
Parameter(s)
List of files
File name
ntp.conf
localtime
portmng.cf
hosts
port.conf
ifconfig.sm0
users
rc.conf
passwd
master.passwd
group
services
snmpd.conf
Binary image
ipl
spl
maptbl
self
kernel4
fs4
recover4
Password required?
Example (from the local console)
Writes the NFS file.
$ writeflash /mnt/conf1/ntp.conf
$
Restart the system after writing the file to reflect the changes.
Writes CF or NFS files to flash ROM.
The firmware can be updated by specifying the path of
the binary image file supplied by Fujitsu Component
Limited.
The LED blinks orange when writing the files.
writeflash <filepath>
filepath = Specifies the full path (location + filename).
The following are the files that can be saved.
Content
NTP config file
Time zone symbolic file
Configuration definition file
Host name definition file
Serial port config file
Network card config file
User config file
Network config file
Password file
Password master file
Group config file
Network service/port config file
Snmpd config file
Content
IPL
SPL
Map information
Self-diagnostics
Kernel that supports
File system that supports
Recovery kernel that supports
No
Enter
SERVIS IP-Serial
79
1p Converter
User's Guide
4