Time Command - Fujitsu FX-3001SR User Manual

4.1.8

time Command

Overview
Syntax
Parameter(s)
Password required?
Notes
(1) Before executing the time command, specify the time zone using the
timezone command. After executing the timezone command, set the
date/time with the time command.
(2) Time adjustments for daylight savings, standard times, leap seconds
and leap years are performed automatically.
Example (from the local console)
Displays the current date/time setting.
$ time 200602241515.00
time setting completed.
$
Displays the current date/time.
$ time
Enter↵
Fri Feb 24 15:15:43 2006 GMT+9
$
Sets the date and time.
Specifying the date/time parameters sets the date/time
settings.
Specifying the time zone parameter displays the
date/time of that time zone.
time [ccyymmddhhmm.ss | zone]
None = Displays the current date and time.
cc = The first two decimal digits (century) of the year.
yy = The second two decimal digits of the year.
If "yy" is specified but "cc" is not, the value of "cc" is 19
for "yy" values between 69 and 99, and "20" for the
other values.
mm = Month (numeric value: 1-12).
dd = Days (numeric value: 1-31).
hh = Hour (numeric value: 0-23).
mm = Minutes (numeric value: 0-59).
.ss = Seconds (numeric value: 0-61).
zone = Time zone name.
No
Enter↵
SERVIS IP-Serial
61
1p Converter
User's Guide
4