3.7. Settings via the Menu
Function overview
The settings of this product can be configured by two interfaces: via the command
line from the shell console environment and via a menu screen.
When logged in to the product, initially the command line interface is displayed;
however, the menu screen can be displayed by executing the menu command.
Refer to
4.1.19 menu Command (page 73)
$ menu
Enter
== MAIN MENU ========
1. switch
2. network
3. time
4. file
5. user
6. serial
7. option
8. ping
0. exit
=====================
select >
Selecting a setting item from this menu configures the same settings as command
line executions in an easier manner.
For details on the menu, refer to the following.
Refer to
Chapter 5 - Menu Settings (page 95)
SERVIS IP-Serial
39
1p Converter
User's Guide
3