Copy Command - Fujitsu FX-3001SR User Manual

Advanced version only
4.1.28

copy Command

Overview
Syntax
Parameter(s)
Password required?
Notes
(1) -l, -c, and -s cannot be specified together.
(2) If no filename is specified, all files are copied.
(3) When the CF card is not mounted, an error is thrown.
Example (from the local console)
copy -l [source filename] [none]
The destination filename inherits the source filename with a three-digit
number appended to it.
copy -l all [destination filename]
The destination filename is the destination filename with a three-digit
number appended to it.
Destination filenames are numbered from 001 in sequence.
copy -l all [none]
The destination filename inherits the source filename with a three-digit
number appended to it.
If a destination file with a three-digit number already exists, the file is saved with
the next number in sequence.
Copies log files and configuration files.
copy <-l | -c | -s> <source filename> <destination
filename>
-l = Copies log files.
-c = Copies configuration files.
-s = Copies system log files.
source filename = Specifies the file to be copied.
destination filename = Specifies the destination of the
copy.
No
SERVIS IP-Serial
83
1p Converter
User's Guide
4