Connecting From A Remote Terminal - Fujitsu FX-3001SR User Manual

2.9. Connecting from a Remote Terminal

Function overview
This product can be accessed by telnet or ssh encrypted communication from a
terminal on a network.
To configure the product from a terminal on a network, log in to the product using
telnet or ssh, and then execute commands from the shell console.
Use the following syntax to connect from a network terminal.
Syntax telnet <host_name>
Parameter(s)
Procedure
The following explanation uses a telnet connection to the product as an example.
The following shows the parameter set to the telnet client:
Protocol
Emulation
1. Power on the terminal PC on the network, and then execute the ping command
to determine whether communication can be established with this product.
Assume the IP address of "192.168.0.50" has been pre-assigned to this
product.
C:\temp> ping 192.168.0.50
2. Execute the telnet connection from the emulator application.
telnet 192.168.0.50
3. Once a telnet session is established, the following "login:" prompt is displayed.
10:54PM on Friday, 12 August 2005
login::
ssh <host_name>
host_name = host name or IP address
Value
VT100 compatible terminal
Enter
Enter
SERVIS IP-Serial
23
1p Converter
User's Guide
2