Table of Contents
Advertisement
Procedure
1.
Log in to the product from a terminal PC on a network, and then match the
settings of the target port and local port.
2.
Execute the redirect command.
$ redirect on com
$
3.
The connection to the target device can be verified when connected to the local
console. (The following is what is displayed when connecting a Linux PC to the
target.)
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
localhost.localdomain login:
4.
To disconnect a COM direct connection, log in to the product from a terminal PC
on the network, and then execute the following command.
$ redirect off
Enter
$
5.
The COM direct is disconnected at the local console, and the following login
screen is displayed.
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-8 on an i686
localhost.localdomain login:
5:24PM on Wednesday, 09 November 2005
login:
During a COM direct connection, other connections (terminal emulator or
Ether-direct) cannot access the target port.
During a COM direct connection, target port logs are stored.
Enter
SERVIS IP-Serial
35
1p Converter
User's Guide
3
Advertisement
Table of Contents
