Table of Contents
Advertisement
5.1.3.4 set ntp server
Overview
Menu location
Command
5
Output
SERVIS IP-Serial
112
1p Converter
User's Guide
Sets the NTP server.
When ntpd is set to ON, the configured NTP server name and
[ON] are displayed.
When ntpd is set to OFF, [OFF] is displayed.
MAIN MENU → 3. time → 4. set ntp server [ON/OFF]
None
When "s. save" is performed after setting this option, the ntp
command is executed and the setting is reflected.
Refer to
NTP Server is being set from OFF to ON.
--- 3. TIME MENU --------
1. display time
2. set time
3. set timezone
4. set ntp server [OFF]
s. save
0. return to MAIN MENU
-------------------------
select > 4
set NTP Server [off -> on]
change [] to : 10.74.106.100
--- 3. TIME MENU --------<changed, not saved>
1. display time
2. set time
3. set timezone
4. set ntp server [ON]
->10.74.106.100
s. save
0. return to MAIN MENU
-------------------------
select >
When NTP Server is set to ON
set NTP Server [on -> off]
Notes
(1) After setting this option, save using "s. save". This setting will not be
enabled if it is not saved.
(2) When executing ntpd, set the date and time in advance using set time.
When the configured date and time vary greatly from the time on the
time server, the time cannot be obtained.
4.1.10 ntp Command (page 63)
Enter
Advertisement
Table of Contents
