Table of Contents
Advertisement
Step7
Set the IP address of this product (default settings).
Set the IP address of this product and restart it.
Refer to
2.7 Setting the IP Address (page 21)
Step8
Configure the target port.
Configure the target port of this product according to the serial device connected
to it.
Refer to
2.8 Setting the Target Port (page 22)
Step9
Connect to this product from a remote terminal.
From a terminal on the network, connect to this product and configure it.
Refer to
2.9 Connecting from a Remote Terminal (page 23)
Step10 Control the device connected to the target port.
Start the terminal emulator (control application) from the shell console to monitor
and control the device connected to the target port.
Refer to
2.10 Controlling Target Devices via a Terminal Emulator
(page 25)
SERVIS IP-Serial
15
1p Converter
User's Guide
2
Advertisement
Table of Contents
