Initial Settings (Manual) - Panasonic DBS-576 Technical Manual

Section 400-Programming

Initial Settings (Manual)

Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
1. Perform the following programming settings. These settings are the minimum
required to make the system work:
•
System Size (see pg. 0-5)
00 Hold (1-6) Hold
•
Free Slot Assignment* (see pg. 0-5)
01 (1-6) (01-12) Hold (1-99) Hold
•
Option Slot Assignment* (see pg. 0-6)
02 (1-6) (13 or 14) Hold (50) Hold
•
System Date/Time (optional; see pg. 8-42)
FF8 1 000 Hold (yymmdd) Hold (hhmm) Hold (1=Monday, 2=Tuesday, ...
7=Sunday) Hold
2. Press ON/OFF to exit Programming Mode.
3. On the CPC card, press RESET (and release
quickly).
4. After a few seconds, the system should be up
and running.
* Eventually, most cards will be automatically
detected when they are installed.
DBS 576 (USA) issued 05/20/98
Introduction to DBS 576 Programming
The CPC-288 Card
(front edge, facing out from cabinet)
CN3
(for PC Upgrade Kit)
RUN LED (FPU)
RUN LED (MPU)
MJ LED
MN LED
RAM HOLD switch
RESET button
CODE rotary switch
MODE button
MOH plug-in
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Intro-5